You can change the settings of your NC° Thermometer Gen3 by going to the top menu in the app > My device > Device settings.
Whenever you change a setting, you have to connect the thermometer with the app for the new settings to be applied. You can do this by clicking on the thermometer’s Settings button while you have the My device page open in the app. The thermometer screen will show “Settings saved” when you have updated the settings.
The app will also let you know if you have any unsaved settings changed by displaying the Device settings icon in orange with the text “Changes pending”.
Below, we will go through which settings you can customize and change on your NC° Thermometer Gen3.
Beeping and button light
The beep and button light options are available to let you know when the thermometer is ready to measure, when the measurement is done, or alert you if there is any error on the thermometer.
You can choose whether you would like to have both options enabled or just one, but either the beep or the button light needs to be enabled at all times.
You can dim the brightness of the screen according to your needs.
Time and date
The time and date of the thermometer will be automatically synced from your device settings when you connect your thermometer to your phone. Once you have set the time and date, you will be able to see this information for each of your temperature measurements and it will also be synced to the app along with your temperature data.
If you travel to a different timezone, the time and date on the thermometer will be updated the next time you connect it with the app.
The thermometer language can be set to English, Swedish, Spanish, or Portuguese. However, please note that the language on the thermometer will always match the language settings in the app.
You can customize your thermometer and add your name – that way, it will greet you by name when you turn it on. Your name on the thermometer will match the name you have in the app.
You can add whether you are right- or left-handed. Depending on which you choose, the screen orientation will be adapted so that you can better see the display and don’t have to view the screen upside-down.
You can change the temperature units on the NC° Thermometer Gen3 from Fahrenheit to Celcius and vice versa.
This can be done via the My device page in the app, or directly on the thermometer by pressing the Settings button for five seconds while the thermometer is turned off.
However, please note that if you have your thermometer and app set to different temperature units, the thermometer’s units will be updated to match the app the next time you connect it with the app.